Cheshire Cat Computing

Can anyone help.

I can monitor serial interfaces without any problems but when I try to monitor dialer interfaces I get no readings

Here is my cfg:

thanks

### Interface 24 >> Descr: 'Dialer9' | Name: 'Di9' | Ip: '10.44.224.74' | Eth: '' ###

Target[10.44.224.74_192.168.1.33]: /192.168.1.33:REMOVED@10.44.224.74:
SetEnv[10.44.224.74_192.168.1.33]: MRTG_INT_IP="192.168.1.33" MRTG_INT_DESCR="Silvertown"
MaxBytes[10.44.224.74_192.168.1.33]: 7000
Title[10.44.224.74_192.168.1.33]: Silvertown
PageTop[10.44.224.74_192.168.1.33]: <H1>#Di9 -- akzo-h_darw02</H1>
<TABLE>
<TR><TD>System:</TD> <TD>akzo-h_darw02 in Leeds</TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD>Dialer9 connected to Silverton </TD></TR>
<TR><TD>ifType:</TD> <TD>ppp (23)</TD></TR>
<TR><TD>ifName:</TD> <TD>Di9</TD></TR>
<TR><TD>Max Speed:</TD> <TD>56.0 kbits/s</TD></TR>
<TR><TD>Ip:</TD> <TD>192.168.1.334 ()</TD></TR>
</TABLE>